Description
- O-Ring Part Number: 272511
- Alternate Part Numbers: 0398, 272511, HAY0512200, O398, PAC0618966, S200Z14, SPX605Z2, SX200Z14, 90-423-7117, APCO2189, HAYSX200Z14, HPPSX200Z14
- Compatible with Pentair Hi-Flow 1.5 Six-Way Multiport Diverter Valve (262504, 262505, 262506) Shaft, commonly found mounted on Sand Dollar SD35, SD40, and SD60 filters.
- Exact OEM mold match for size and material. Package contains three (3) o-rings (also called gaskets or seals).
- Manufactured and warrantied by Captain O-Ring LLC. Proudly assembled in the USA!
| O-Ring Part Number: | 272511 |
|---|---|
| Alternate Part Numbers: | 0398, 272511, HAY0512200, O398, PAC0618966, S200Z14, SPX605Z2, SX200Z14, 90-423-7117, APCO2189, HAYSX200Z14, HPPSX200Z14 |
| Compatible With: | Pentair Hi-Flow 1.5 Six-Way Multiport Diverter Valve (262504, 262505, 262506) |
| Commonly Found On: | Sand Dollar SD35, SD40, and SD60 filters (as well as other models). Check your unit’s manual/parts diagram to confirm this is the correct o-ring size/part number you are looking for. |
| O-Ring Dimensions: | 0.730” Inside Diameter (approximately 3/4”), 1.01” Outside Diameter (approximately 1”), 0.140” Thickness (just over 1/8”) |
| Package Quantity: | Three (3) o-rings |
| Country of Assembly: | USA |
Get your leaking valve back in working order with Captain O-Ring’s replacement 272511 o-rings. The 272511 o-ring is compatible with Pentair Hi-Flow 1-1/2” Six-Way Multiport Diverter Valves (model numbers 62504, 262505, 262506). This o-ring is located on the valve/diverter shaft (see photos for exact o-ring location). This valve is commonly mounted on top of the Sand Dollar D35, SD40, and SD60 sand filters as well as some other models. Check your unit’s manual/parts diagram to confirm this is the correct o-ring size/part number you are looking for.
O-Ring Part Number: 272511
Alternate Part Numbers: 0398, 272511, HAY0512200, O398, PAC0618966, S200Z14, SPX605Z2, SX200Z14, 90-423-7117, APCO2189, HAYSX200Z14, HPPSX200Z14
Approximate O-Ring Dimensions: 0.730” Inside Diameter (approximately 3/4”), 1.01” Outside Diameter (approximately 1”), 0.140” Thickness (just over 1/8”)
Molded from OEM spec synthetic rubber in the exact OEM mold. This o-ring is an exact match to your original o-ring when your unit was brand new.
Package contains three (3) o-rings. Replace your old, worn, leaking o-ring and have spares on hand for the future with this handy 3-pack. Manufactured and warrantied by Captain O-Ring LLC. Proudly assembled in the USA!
